TOP SELLING PRODUCTS
06
07
08
012
014
018
LINDSTROM CUTTER 8150
PRODUCT DETAILS :
Precision oval head diagonal cutters developed according to the scientific ERGO™ process, Oval head
ERGO™ handles with two-component combination, thermoplastic surface, for comfortable grip, on tough polypropylene core for rigidity
Micro-bevel, flush & ultra-cut
The cutting capacity that is given is for copper wire
Cutting capacity: 0.1 mm-0.8 mm to 0.4 mm-2 mm
High performance alloyed steel
Burnished finish
Numerically controlled machine grinding guarantees edge angle accuracy & contact, increases the tool's reliability & consistency
Precision induction-hardened edges 63-65 HRC
Screw joint minimises friction & maximises alignment of cutting edges
ESD safe handles in two-component synthetic material
Bio spring limits the tension throughout the working cycle of the tool & can be adjusted to 3 different positions or removed
Ideal for wire harness work & standard printed circuit board assembly
“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots.
The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.
SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.
Recommended operating speeds for most applications is 3,000-18,000 RPM. Â Lower speeds allow a softer touch, greater flexibility and more subtle results. Â Higher speeds provide more aggressive material removal. Â Using the tips of the pin with light pressure maximizes tool life.
Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.
“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots.
The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.
SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.
Recommended operating speeds for most applications is 3,000-18,000 RPM. Â Lower speeds allow a softer touch, greater flexibility and more subtle results. Â Higher speeds provide more aggressive material removal. Â Using the tips of the pin with light pressure maximizes tool life.
Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.
Adentatech System DURO
SYSTEM Duro is a non-precious dental cast alloy for crowns and bridges on cobalt-base, type 5.
SYSTEM Duro is easy to use and quick to polish with excellent laser welding properties. The alloy can be melted by open flame or induction heating. SYSTEM Duro can be used with any commercial, phosphate- bonded investment material (our recommendation: ADENTA®-VEST CB). SYSTEM Duro can be veneered with any high-fusing ceramics.
Dentorium AB211 Cut – Off Wheel
Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys.
Dentorium has abrasives for metals, ceramics and acrylics - known worldwide for their exceptional quality and low cost.
Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.
2/0
3/0
4/0
5/0
6/0
7/0
8/0
Greystar Polishing Compund
Pre-polishing compound for harder metals, removes deeper scratches and freshens up the surface
- Small size compound bar (100x30x15mm)
- Individually packed in DIALUX® branded box
- Adheres well to mops or buffs
- Long lasting, easy to use
- Excellent price - performance ratio
07
08
09
010
011
012
013
014
015
016
017
018
021
023
ELA Wheel Burs 3
All burs have a standard shaft diameter of 2.35mm fitting Jewellery Industry standard handpieces. These burs are supplied by Emil Lannge Zahnbohrerfabrik from Germany, founded by Emil Lange Sen. in Engelskirchen in 1919, who were one of the world's first companies to develop and manufacture carbide-tipped drills in 1953.
Burs are sold individually or multiples of any quantity.
MEISINGER Steel Instrument Burs HART 485T
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
ENSET© Compact System (800200)
The Enset© compact pneumatic is the entry model for engraving and crimping on jewelry pieces, its extraordinary power combined with the precision of the electronic foot pedal makes engraving fluid and with excellent control of cutting depth and brightness.
It has a single port for quick connection of the handpiece. It has a filter valve to protect the equipment. In the compact version the pneumatic force is regulated by a wheel on the control panel and is reflected on the integrated pressure gauge. Through the pedal we will increase the number of impulses per minute to transfer the pneumatic force to the handpiece.
The precision of the electronic pedal allows control of engraving and setting, protecting the valuable pieces of precious metals and guarantees the protection of the stone to be set against eventual shocks with the burin or the pearler.
It is a robust machine, simple and intuitive to use, and uniquely compact, taking up very little space on the engraving table. You just need to plug it into the network and the pneumatic compressor and start engraving or engraving.
The air consumption is very low so it can also be used connected to a CO2 bottle.
ELA Steel Burs Cross Cut 038
All burs have a standard shaft diameter of 2.35mm fitting Jewellery Industry standard handpieces. These burs are supplied by Emil Lannge Zahnbohrerfabrik from Germany, founded by Emil Lange Sen. in Engelskirchen in 1919, who were one of the world’s first companies to develop and manufacture carbide-tipped drills in 1953.
Burs are sold individually or multiples of any quantity.
DENTECON Thermabond
THERMABOND V™, Fine Grain porcelain users enjoyed using this alloy. This popular alloy has been at international markets for over a decade. Millions of cases have been cast with this alloy all over the world since 1981. It Has won the recognition and confidence of dedicated dental technicians throughout the world.
VALLORBE TRAINGULER LA2407 – 200 – 4
Glardon-Vallorbe Swiss Made Needle Files-The world's standard for quality and performance!
Glardon-Vallorbe Swiss Made Needle Files are manufactured to precise production standards, using a combination of machine cutting and hand craftsmanship to produce the most accurate, best cutting, and longest-lasting files in the world. They are made of the finest heat-tempered, chrome alloy steel and have the "right" feel, action and balanced desired by all true craftsmen. Glardon-Vallorbe Swiss Made Needle Files deliver superior performance on all metals. Simply the best you can buy!
ANODE ALBILEX (4×3)
In general mixed metal oxide coated titanium anodes consist of a titanium base activated with a coating like rutile structure out of platinum group metal oxides, i.e. mixed with titanium, tantalum or other oxides.
ALBILEX®-MMO-Anodes – used for the electrophoretic coating process Antitarnish-A-100 PRO-KIT - are based on an iridium-tantalum activation, 12.5 g iridium per sqm, titanium mesh type A, with a welded hook.
Dentorium AB210 Cut – Off Wheel
- Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.
016
018
023
05
06
07
08
09
010
VALLORBE ROUND FILE LA2410-200-4
These Swiss-made, high-precision durable files are manufactured from chrome alloy steel and heat treated by a special process to guarantee sharper teeth for outstanding cutting performance on all hard and soft metals, including platinum. Designed with rounded handles. These files are measured from the point where the teeth begin to the end of the file. These Glardon® Vallorbe files are graded with a number from 00 for coarsest to 6 for finest. *Please note that the higher the number is, the finer the cut.
Vallorbe jewellers saw blades are high quality, Swiss made saw blades. They have straight, uniform, sharp teeth, and retain there flexibility. Vallorbe saw blades are made from the highest quality steel, making them less likely to break whilst working.
WHITE DIAMOND LUSTER
Perfect polishing compound for sterling silver, with good reflective properties.
- Small size compound bar (100x30x15mm)
- Individually packed in DIALUX® branded box
- Adheres well to mops or buffs
- Long lasting, easy to use
- Excellent price - performance ratio
Enset Plus System (800100)
The best solution for engraving and crimping with a pneumatic system. It is a digitally controlled system for the engraving of jewelry pieces, system with double port for the connection of two different handpieces.
It has double operating system being able to choose between the original system in which the engraving force is controlled on the panel and the speed of impacts on the pedal or choose the plus mode in which the number of impacts per minute is set on the panel and by means of the pedal the force of the impact on the handpiece is increased with the limit previously set on the panel.
It also has a self-bleeding filter valve to guarantee the good condition of the machine. The system allows a precise engraving and with excellent control of the depth of the cut which allows an excellent brightness in the engraving of gold, silver and precious metals.
The setting control by means of the plus system guarantees absolute control of the impact of the grass on the piece of jewelry that avoids damage to the piece with an undesirable blow on it. It is a very reliable, resistant and small size system.
It is connected to a compressor by means of a plastic hose and the air consumption is very reduced and can also work with a co2 bottle.
Adentatech System MG
SYSTEM MG is a non-precious dental model cast alloy on cobalt-base, type 5.
SYSTEM MG is suitable for removable partial dentures as well as for all kind of combined works. Easy melting and polishing as well as high mechanical performance are the features of SYSTEM MG. The melting can be done by open flame or inductive heating. For investing we recommend any commercial, phosphate-bonded investment material for model cast (our recommendation: ADENTA®-VEST PA).
Dentecon Supercast
SUPERCAST™, High performance non-precious ceramic alloy, with
outstanding quality and excellent bonding strength.
This alloy is designed for the production of high quality porcelain-fused-to-metal restorations.
This alloy has been CAST on over millions of restorations all around the world, it is the most trouble free and user friendly alloy.
About ARC DISTRIBUTORS
Importers & Distributors of jewellery tools – cutting and polishing products. we also have dental laboratory and clinical products & sports nutrition from various countries like Spain, Italy, France ,Germany, Switzerland, UK ,USA etc.. It Includes Steel Burs, Buffs & Polishers, Brush, Injection Wax, Diamond Burs, Dental Polishers etc..
Shop by Category for Dental Tools
012
MEISINGER DIAMOND BUR 850
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Select options
This product has multiple variants. The options may be chosen on the product page
016
018
021
023
MEISINGER DIAMOND BUR 852
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Select options
This product has multiple variants. The options may be chosen on the product page
016
018
MEISINGER DIAMOND BUR 862
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Select options
This product has multiple variants. The options may be chosen on the product page
012
025
MEISINGER DIAMOND BUR 863
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Select options
This product has multiple variants. The options may be chosen on the product page
MEISINGER DIAMOND BUR 875G
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
MEISINGER DIAMOND BUR 879H
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
MEISINGER Steel Instrument Burs CROSS CUT 38
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Meisinger Steel Instrument Burs CUP CUT 469A – 010
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
06
07
08
09
010
012
014
016
018
021
023
MEISINGER Steel Instrument Burs Cylinder Sq 036
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Select options
This product has multiple variants. The options may be chosen on the product page
05
06
07
08
010
011
012
013
014
015
018
020
021
MEISINGER Steel Instrument Burs DRILL 203
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
Select options
This product has multiple variants. The options may be chosen on the product page
SHOP BY CATEGORY FOR JEWELRY TOOLS
201C-010-MULTIPLIERS 2 IN 1 CHN & RND NOSE
MultiPliers - featuring a Chain Nose AND a Round Nose head for wire wrapping and DIY jewelry making... because two heads are better than one! The special stainless steel head of MultiPliers feature double leaf-spring loaded handles and combines a set of Round Nose and Chain Nose Pliers that move simultaneously. A quick one-handed flip brings the opposite tips to the same work area, instead of taking the time to put down one pair of pliers and pick-up the next, saving valuable time. The time to pick up and put down conventional pliers can be spent creating and finishing the loops which can be significant given the amount of time it takes to create a chain of beads with wire wrapping.
201E-005-BENT CHAIN NOSE PLIERS DESIGNER
These high quality tip Stainless Steel Bent Chain Nose Pliers are useful in so many wire wrapping and wire forming applications, opening and closing Bead Tips and clasps, and for grasping small components. For use with German Style Wire, Artistic Wire, and other soft-tempered wires. Box joint and double leaf spring construction. 5 inches (12.7 cm).
201E-007-FLAT NOSE PLIERS DESIGNER
201S-270 NYLON JAW BENDING PLIERS
Nylon Jaw Bending Pliers,
Box Joint,
Polished Stainless Steel Handles.
Use the Nylon Jaw Bending Pliers to prevent marring and marking your wire and components as you bend them into a gentle curve that will comfortably fit your wrist. Use these stainless steel pliers to form a complete circle for a bangle bracelet, or gently form a flat component into a perfect curve.
201X-290-PLIERS NYLN CHING STP RD,OV,SQ
202K-040-AW TRAVEL TOOL KIT W/CASE ( 5pcs set )
205S-012-HOLE PUNCH PLIERS 1.8mm
228S-420-AW WIRE STRAIGHTENER TOOL
The Artistic Wire Straightener tool makes it easy to straighten wire that has been worked. Put the rollers in your hand in the open position with each of the rollers side by side. Lay the end of a piece of wire that requires straightening on the three rollers, then move the rollers until they form a triangle with the wire in the center. Grasp the rollers in one hand holding tightly, then pull the wire through the rollers to straighten. May need to pull through a second time for highly bent wires. Nylon rollers help keep Artistic Wire coating intact.
CHAIN NOSE PLIERS-JTCN1
Chain Nose Pliers are great for closing Bead Tips (p. 112) and crimping in tight places. Tapered tips, smooth jaws, and slightly rounded edges allow accurate crimping, shaping, and bending. A good tool for use with Artistic Wire and for wire wrapping. Box joint, double leaf spring construction with red vinyl handles. 5 inches (12.7 cm).