Showing 1–36 of 196 results

“DEDECO SUNBURST 2MM BROWN POLISHING PINS EXTRA COARSE – 80 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

201C-010-MULTIPLIERS 2 IN 1 CHN & RND NOSE

0.00
MultiPliers - featuring a Chain Nose AND a Round Nose head for wire wrapping and DIY jewelry making... because two heads are better than one! The special stainless steel head of MultiPliers feature double leaf-spring loaded handles and combines a set of Round Nose and Chain Nose Pliers that move simultaneously. A quick one-handed flip brings the opposite tips to the same work area, instead of taking the time to put down one pair of pliers and pick-up the next, saving valuable time. The time to pick up and put down conventional pliers can be spent creating and finishing the loops which can be significant given the amount of time it takes to create a chain of beads with wire wrapping.

201E-005-BENT CHAIN NOSE PLIERS DESIGNER

0.00
These high quality tip Stainless Steel Bent Chain Nose Pliers are useful in so many wire wrapping and wire forming applications, opening and closing Bead Tips and clasps, and for grasping small components. For use with German Style Wire, Artistic Wire, and other soft-tempered wires. Box joint and double leaf spring construction. 5 inches (12.7 cm).

201E-007-FLAT NOSE PLIERS DESIGNER

0.00
Open and close Jump Rings, form wire, grip and straighten bent wire. Make sharp bends and right angles in Artistic Wire and other soft wire. Stay-open tips. Stainless Steel, box Joint, double leaf spring construction. 5 inches (12.7 cm).

201S-270 NYLON JAW BENDING PLIERS

0.00
Nylon Jaw Bending Pliers, Box Joint, Polished Stainless Steel Handles. Use the Nylon Jaw Bending Pliers to prevent marring and marking your wire and components as you bend them into a gentle curve that will comfortably fit your wrist. Use these stainless steel pliers to form a complete circle for a bangle bracelet, or gently form a flat component into a perfect curve.  

201X-290-PLIERS NYLN CHING STP RD,OV,SQ

0.00
  • Create Square, Round & Oval shapes quickly with the same tool!
  • Use the screwdriver to swap the head with one of the other row forms.
  • Smooth Nylon Tips allow for maximum grip without marring or damaging the wire

202E-007-SEMI-FLUSH CUTTER DESIGNER

0.00
These high quality tip Stainless Steel Semi Flush Cutter 5 inches (12.7 cm).

202K-040-AW TRAVEL TOOL KIT W/CASE ( 5pcs set )

0.00
Kit contains :-   
  • Chain Nose Pliers with a built in Cutter,
  • Round Nose Pliers,
  • Plastic Jaw Pliers,
  • Cutter and a Jump Ring Mandrel
Jump Ring Mandrel makes 5 sizes of Rings Quality Tools at an affordable price

205S-012-HOLE PUNCH PLIERS 1.8mm

0.00
Use the Hole Punch Pliers to punch a 1.8mm (.071 in) hole in leather, soft sheet metal (copper, silver, aluminum, etc.), Flat Artistic Wire, Organza Ribbon, and even some plastics.

205S-110-AW 2 HOLE PUNCH 1.5mm & 2.0mm

0.00
Artistic Wire 2 Hole Leather/Metal Twist Punch, 1.5 mm / 0.06 in and 2.0 mm / 0.79 in holes

228S-420-AW WIRE STRAIGHTENER TOOL

0.00
The Artistic Wire Straightener tool makes it easy to straighten wire that has been worked. Put the rollers in your hand in the open position with each of the rollers side by side. Lay the end of a piece of wire that requires straightening on the three rollers, then move the rollers until they form a triangle with the wire in the center. Grasp the rollers in one hand holding tightly, then pull the wire through the rollers to straighten. May need to pull through a second time for highly bent wires. Nylon rollers help keep Artistic Wire coating intact.

ADENTA®-VEST CB

0.00
ADENTA®-VEST CB is a phosphate-bonded investment powder for all precious and non-precious dental alloys for crowns and bridges. ADENTA®-VEST CB can be used for the speed casting as well as for conventional heating (overnight-technique). The adequate expansion can be adjusted for every type of alloy by changing the concentration of the appropriate Adentatec MIXING LIQUID. ADENTA®-VEST CB features a high fitting accuracy (even for wide span bridges) of non precious dental alloys. Mixing ration: 100 g : 24-26 ml Packaging: 10,08 kg box (63 x 160 g bags)

STANDARD VALUES FOR THE LIQUID CONCENTRATION

Material Inlay, Veneers Crowns Bridges
CoCr alloy 85 % 85 % 95 %
Gold alloy 55 % 60 % 65 %
Press-ceramic 60 % 60 %

INFORMATION ABOUT ADENTA®-VEST CB

– For precious alloys – For non-precious alloys – For pressable ceramics – For conventional and speed casting – Clean and smooth surface – High fitting accuracy – Smooth and dense consistancy – Flexible and cost-efficient

Adentatech System DURO

0.00

SYSTEM Duro is a non-precious dental cast alloy for crowns and bridges on cobalt-base, type 5.

SYSTEM Duro is easy to use and quick to polish with excellent laser welding properties. The alloy can be melted by open flame or induction heating. SYSTEM Duro can be used with any commercial, phosphate- bonded investment material (our recommendation: ADENTA®-VEST CB). SYSTEM Duro can be veneered with any high-fusing ceramics.

Adentatech System KN

0.00
SYSTEM KN is easy to use and quick to polish with excellent laser welding properties. The alloy can be melted by open flame or induction heating. SYSTEM KN can be used with any commercial, phosphate-bonded investment material (our recommendation: ADENTA®-VEST CB). SYSTEM KN can be veneered with any high-fusing ceramics.

Adentatech System MG

0.00

SYSTEM MG is a non-precious dental model cast alloy on cobalt-base, type 5.

SYSTEM MG is suitable for removable partial dentures as well as for all kind of combined works. Easy melting and polishing as well as high mechanical performance are the features of SYSTEM MG. The melting can be done by open flame or inductive heating. For investing we recommend any commercial, phosphate-bonded investment material for model cast (our recommendation: ADENTA®-VEST PA).

ANODE ALBILEX (4×3)

0.00
In general mixed metal oxide coated titanium anodes consist of a titanium base activated with a coating like rutile structure out of platinum group metal oxides, i.e. mixed with titanium, tantalum or other oxides. ALBILEX®-MMO-Anodes – used for the electrophoretic coating process Antitarnish-A-100 PRO-KIT - are based on an iridium-tantalum activation, 12.5 g iridium per sqm, titanium mesh type A, with a welded hook.

BLACK SOFT GRIP SPRUE CUTTERS 55595

0.00
  • Side cutter / Flush cutter
  • Available in blue and black
  • Made of stainless steel
  • Soft cushion grip handles designed for ultimate comfort and a secure grip
  • Spring-loaded technology helps reduce hand cramping and fatigue.
  • Allows precise cuts with ease on different materials like, wires, metals, plastics, paper, etc.
  • Includes (1) one  Sprue Cutter 5.1 in.-12.7 cm.

BLUE SOFT GRIP SPRUE CUTTERS 55594

0.00
  • Side cutter / Flush cutter
  • Available in blue and black
  • Made of stainless steel
  • Soft cushion grip handles designed for ultimate comfort and a secure grip
  • Spring-loaded technology helps reduce hand cramping and fatigue.
  • Allows precise cuts with ease on different materials like, wires, metals, plastics, paper, etc.
  • Includes (1) one  Sprue Cutter 5.1 in.-12.7 cm.

CALIBRA-EXPRESS

0.00
UNIVERSAL INVESTMENTS FOR FIXED PROSTHESIS. MADE IN SPAIN
  • A SINGLE INVESTMENT FOR ALL FIXED PROSTHETIC WORKS.
  • POSSIBILITY OF CASTING BY DIRECT OR NORMAL HEATING.
  • POSSIBILITY OF CASTING PRESSED CERAMIC.
ADVANTAGES:-
  • Reproduction of the fi nest details.
  • Easy demolding.
  • Easy sandblasting.
  • Fast or conventional heating.
PHYSICAL PROPERTIES:-
  • Fluidity: 140-160 MM.
  • FInitial hardening: 6-8 min.
  • Resistance to compression: 4-6 MPa.
  • Thermal linear expansion: 0,97% (900ºC).

CHAIN NOSE PLIERS-JTCN1

0.00
Chain Nose Pliers are great for closing Bead Tips (p. 112) and crimping in tight places. Tapered tips, smooth jaws, and slightly rounded edges allow accurate crimping, shaping, and bending. A good tool for use with Artistic Wire and for wire wrapping. Box joint, double leaf spring construction with red vinyl handles. 5 inches (12.7 cm).

CLASSIC NIPPER TOOL-JTNIP1

0.00
Use this compact and economical Nipper Tool to get in close when cutting soft wire or thread. This rivet joint cutter is great to keep handy when you're working with Beadalon beading wires, Artistic Wire or other soft beading cords, and it's comfortable in the hand. 5 inches (12.7 cm).

CLASSIC SPLIT RING PLIERS-JTSPLTRG1

0.00
Specially designed for opening split rings and making attachments fast and easy. Hardened steel nose separates split rings and keeps them separated while you secure findings. Spring hinge increases comfort and reduces fatigue. 5.25 inches (13.3 cm).

D&Z CYLINDER BUR CB31

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z INVERTED CONE BUR CB30

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z ROUND BUR CB1

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z TAPERED BUR CB33

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z TAPERED BUR CB33L

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

DEDECO SUNBURST 3MM BROWN POLISHING PINS

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the “absolute best” for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry –  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

Dentecon Supercast

0.00
SUPERCAST™, High performance non-precious ceramic alloy, with outstanding quality and excellent bonding strength. This alloy is designed for the production of high quality porcelain-fused-to-metal restorations. This alloy has been CAST on over millions of restorations all around the world, it is the most trouble free and user friendly alloy.

DENTECON Thermabond

0.00
  THERMABOND V™, Fine Grain porcelain users enjoyed using this alloy. This popular alloy has been at international markets for over a decade. Millions of cases have been cast with this alloy all over the world since 1981. It Has won the recognition and confidence of dedicated dental technicians throughout the world.

Dentorium AB210 Cut – Off Wheel

0.00
  • Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium AB211 Cut – Off Wheel

0.00
Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics - known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium Blue Magic Rubber Points AB207

0.00

Dentorium Products AB207 - RUBBER POINTS BLUE

RUBBER POINTS BLUE Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals. Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium Blue Magic Rubber Wheel AB206

0.00

Dentorium Products AB206 - RUBBER POINTS BLUE

RUBBER POINTS BLUE Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.