Showing 1–9 of 52 results

“DEDECO SUNBURST 2MM BROWN POLISHING PINS EXTRA COARSE – 80 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

ADENTA®-VEST CB

0.00
ADENTA®-VEST CB is a phosphate-bonded investment powder for all precious and non-precious dental alloys for crowns and bridges. ADENTA®-VEST CB can be used for the speed casting as well as for conventional heating (overnight-technique). The adequate expansion can be adjusted for every type of alloy by changing the concentration of the appropriate Adentatec MIXING LIQUID. ADENTA®-VEST CB features a high fitting accuracy (even for wide span bridges) of non precious dental alloys. Mixing ration: 100 g : 24-26 ml Packaging: 10,08 kg box (63 x 160 g bags)

STANDARD VALUES FOR THE LIQUID CONCENTRATION

Material Inlay, Veneers Crowns Bridges
CoCr alloy 85 % 85 % 95 %
Gold alloy 55 % 60 % 65 %
Press-ceramic 60 % 60 %

INFORMATION ABOUT ADENTA®-VEST CB

– For precious alloys – For non-precious alloys – For pressable ceramics – For conventional and speed casting – Clean and smooth surface – High fitting accuracy – Smooth and dense consistancy – Flexible and cost-efficient

Adentatech System DURO

0.00

SYSTEM Duro is a non-precious dental cast alloy for crowns and bridges on cobalt-base, type 5.

SYSTEM Duro is easy to use and quick to polish with excellent laser welding properties. The alloy can be melted by open flame or induction heating. SYSTEM Duro can be used with any commercial, phosphate- bonded investment material (our recommendation: ADENTA®-VEST CB). SYSTEM Duro can be veneered with any high-fusing ceramics.

Adentatech System KN

0.00
SYSTEM KN is easy to use and quick to polish with excellent laser welding properties. The alloy can be melted by open flame or induction heating. SYSTEM KN can be used with any commercial, phosphate-bonded investment material (our recommendation: ADENTA®-VEST CB). SYSTEM KN can be veneered with any high-fusing ceramics.

Adentatech System MG

0.00

SYSTEM MG is a non-precious dental model cast alloy on cobalt-base, type 5.

SYSTEM MG is suitable for removable partial dentures as well as for all kind of combined works. Easy melting and polishing as well as high mechanical performance are the features of SYSTEM MG. The melting can be done by open flame or inductive heating. For investing we recommend any commercial, phosphate-bonded investment material for model cast (our recommendation: ADENTA®-VEST PA).

CALIBRA-EXPRESS

0.00
UNIVERSAL INVESTMENTS FOR FIXED PROSTHESIS. MADE IN SPAIN
  • A SINGLE INVESTMENT FOR ALL FIXED PROSTHETIC WORKS.
  • POSSIBILITY OF CASTING BY DIRECT OR NORMAL HEATING.
  • POSSIBILITY OF CASTING PRESSED CERAMIC.
ADVANTAGES:-
  • Reproduction of the fi nest details.
  • Easy demolding.
  • Easy sandblasting.
  • Fast or conventional heating.
PHYSICAL PROPERTIES:-
  • Fluidity: 140-160 MM.
  • FInitial hardening: 6-8 min.
  • Resistance to compression: 4-6 MPa.
  • Thermal linear expansion: 0,97% (900ºC).

D&Z CYLINDER BUR CB31

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.