Showing 1–24 of 63 results

“DEDECO SUNBURST 2MM BROWN POLISHING PINS EXTRA COARSE – 80 GRIT”

No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”

No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”

No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

D&Z CYLINDER BUR CB31

For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z ROUND BUR CB1

For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z TAPERED BUR CB33

For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z TAPERED BUR CB33L

For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

Dentorium AB210 Cut – Off Wheel

  • Aluminum oxide grain for cutting of chrome and other metals.
  • Strong and long wear.

Dentorium AB211 Cut – Off Wheel

Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics - known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium Red Discs AB221

Superb for the cutting, grinding and trimming of sprues. Aluminum Oxide for Chrome Cobalt. Made from the same high quality grain as regular but reinforced with glass fibre to give higher breaking resistance.

EVE Universal L22M Black

  • For smoothing all dental materials
  • Soft silicone bonding adapts to the surface being processed
  • Various shapes for different applications
  • Silicon carbide abrasive

EVEFLEX PINS BLUE 53

  • For polishing hard to reach areas
  • To be used with the corresponding mandrel
  • Different grits, sizes and bondings
  • With or without mandrel available

Eveflexpin Black 62

  • For polishing hard to reach areas
  • To be used with the corresponding mandrel
  • Different grits, sizes and bondings
  • With or without mandrel available

Eveflexpin Black 63

  • For polishing hard to reach areas
  • To be used with the corresponding mandrel
  • Different grits, sizes and bondings
  • With or without mandrel available