Showing 1–6 of 34 results

“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”

0.00

No matter what the material being worked, SUNBURST POLISHING PINS are the “absolute best” for finishing & polishing hard-to-access areas without removing detail or causing flat spots.

The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.

SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.

Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life.

Jewelry –  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”

0.00

No matter what the material being worked, SUNBURST POLISHING PINS are the “absolute best” for finishing & polishing hard-to-access areas without removing detail or causing flat spots.

The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.

SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.

Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life.

Jewelry –  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

Adentatech System DURO

0.00

SYSTEM Duro is a non-precious dental cast alloy for crowns and bridges on cobalt-base, type 5.

SYSTEM Duro is easy to use and quick to polish with excellent laser welding properties. The alloy can be melted by open flame or induction heating.

SYSTEM Duro can be used with any commercial, phosphate- bonded investment material (our recommendation: ADENTA®-VEST CB).

SYSTEM Duro can be veneered with any high-fusing ceramics.

Adentatech System MG

0.00

SYSTEM MG is a non-precious dental model cast alloy on cobalt-base, type 5.

SYSTEM MG is suitable for removable partial dentures as well as for all kind of combined works. Easy melting and polishing as well as high mechanical performance are the features of SYSTEM MG.

The melting can be done by open flame or inductive heating. For investing we recommend any commercial, phosphate-bonded investment material for model cast (our recommendation: ADENTA®-VEST PA).

ANODE ALBILEX (4×3)

0.00

In general mixed metal oxide coated titanium anodes consist of a titanium base activated with a coating like rutile structure out of platinum group metal oxides, i.e. mixed with titanium, tantalum or other oxides.

ALBILEX®-MMO-Anodes – used for the electrophoretic coating process Antitarnish-A-100 PRO-KIT – are based on an iridium-tantalum activation, 12.5 g iridium per sqm, titanium mesh type A, with a welded hook.

D&Z CYLINDER BUR CB31

0.00

For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.