OPERATING DATA | OPTIMAL | RANGE |
Voltage | 3 volts | 2 – 6 volts |
Current Density (A/dm2) | 3 A | 0,5 – 10 |
Working PH | 1 | |
Working Temperature | 45-50° C | 30 – 60°C |
Deposit Data | 0,02 Micron/Minute of plating | |
Exposure time | 45 sec. | 30- 60 sec. |
Anode/Cathode Ratio | 2:1 | |
Anode Type | Platonized Titanium | |
Cathodic Movement | Moderate |
- RECOMMENDATION
For maximum performances do not excessive agitation. For processes which involve large volumes, for agitation of
the solution using a magnetic filter pump with not too high capacity; for smaller tanks a moderate agitation of the
pieces is adequate. - POST TREATMENT
The electrolyte should be removed from the surface as quick us possible. Wash off the bath residual in a recovery
rinse. Rinse the parts in circulating deionized and dry. - WATER PURITY
To prevent contamination of the bath both during its preparation and any subsequent replenishing operations, use
demineralized water with a conductivity of less than 3 ÎĽS/cm. - SAFETY INFORMATION
Being an acidic solution, the electrolyte is corrosive therefore is an irritant to the skin, eyes and mucous membranes.
Caution should be exercised when using the product, avoiding contact with the eyes and skin. Use gloves and safety
goggles. Keep away from cyanide based chemicals.
Reviews
There are no reviews yet.