All products
06
07
08
010
012
014
016
018
021
023
ELA Carbide CC Burs C33
07
08
09
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
033
035
037
040
045
MEISINGER Steel Instrument Burs HART 485
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
ENGRAVING PEN CP9361
Constructed of premium components for a superior durability. Easy handling and comfortable use with an adjustable power for a variety of applications and materials such as: metals, plastics, ceramics, and glass
Take advantages of this CP9361 compact, light, durable and efficient chipping hammer. The CP9361 range is defined by 2 models, raw CP9361 and kit CP9361-1 (CP9361, pneumatic hose and filter, stylus, chisels and carrying case).
2/0
3/0
4/0
5/0
6/0
7/0
8/0
Golden Eye Saw Blade
07
08
09
010
011
012
013
014
015
016
017
018
021
023
“DEDECO SUNBURST 2MM BROWN POLISHING PINS EXTRA COARSE – 80 GRIT”
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots.
The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.
SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.
Recommended operating speeds for most applications is 3,000-18,000 RPM. Lower speeds allow a softer touch, greater flexibility and more subtle results. Higher speeds provide more aggressive material removal. Using the tips of the pin with light pressure maximizes tool life.
Jewelry - Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.
Dentorium AB210 Cut – Off Wheel
- Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.
Eveflexpin BLUE 53
Eveflexpin Green 82
Meisinger Steel Instrument Burs CUP CUT 469A – 010
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
D&Z ROUND BUR CB1
MEISINGER DIAMOND BUR 879H
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
012
MEISINGER DIAMOND BUR 850
DESCRIPTION :
BLISTER PACKAGING :- MEISINGER Blister Packaging, Packed by Silver Foil, no Paper
- Clean and easy removal of single instruments
- Forms are easy to recognize. Use of popular item numbers on the packaging
CHARACTERISTICS :
- Higher Cutting Efficiency
- Superior Diamond Coating
- Color Ring separated from working part
- Shank Diameter to u-tolerance precise
- Modern Silver Foil Blister Packaging
EVE TECHNIK H330K
Dentecon Supercast
SUPERCAST™, High performance non-precious ceramic alloy, with
outstanding quality and excellent bonding strength.
This alloy is designed for the production of high quality porcelain-fused-to-metal restorations.
This alloy has been CAST on over millions of restorations all around the world, it is the most trouble free and user friendly alloy.
05
06
07
08
09
010
ELA Carbide Bur Drill C203
Multipurpose Desktop Engraving Machine MAGIC™-E7
MAGIC-E7 is an all-in-one engraving machine for both flat and rotary engraving and cutting. It is widely used and available in the global jewelry/accessory industry. It is designed to deal with the complex aspects of jewelry making, particularly: forms, materials, and sizes. It is ideal for easy and quick cutting, and engraving of various jewelry products such as rings, pendants, earrings, bracelets and bangles.
-
All-in-one Desktop Engraver
MAGIC-E7 is a 3rd generational multipurpose engraving machine that is built and designed to produce precise, high-quality engraving, cutting and marking results on various jewelry products. It is equipped with a flat clamp that engraves and marks on pendants and plates; and a rotary clamp that engraves on rings, bangles and pens by default.
-
Fast and Easy Engraving, Cutting, and Marking
It facilitates engraving and cutting by spindle rotation and scribe marking using a diamond tool.
-
Advanced and Innovative Features
It offers innovative functions, outstanding engraving performance, higher resolution and quality, great structural stability, and modern aesthetic design. Its features and structure are designed and built following the newest and latest technology.
ENSET© Compact System (800200)
The Enset© compact pneumatic is the entry model for engraving and crimping on jewelry pieces, its extraordinary power combined with the precision of the electronic foot pedal makes engraving fluid and with excellent control of cutting depth and brightness.
It has a single port for quick connection of the handpiece. It has a filter valve to protect the equipment. In the compact version the pneumatic force is regulated by a wheel on the control panel and is reflected on the integrated pressure gauge. Through the pedal we will increase the number of impulses per minute to transfer the pneumatic force to the handpiece.
The precision of the electronic pedal allows control of engraving and setting, protecting the valuable pieces of precious metals and guarantees the protection of the stone to be set against eventual shocks with the burin or the pearler.
It is a robust machine, simple and intuitive to use, and uniquely compact, taking up very little space on the engraving table. You just need to plug it into the network and the pneumatic compressor and start engraving or engraving.
The air consumption is very low so it can also be used connected to a CO2 bottle.
Enset Plus System (800100)
The best solution for engraving and crimping with a pneumatic system. It is a digitally controlled system for the engraving of jewelry pieces, system with double port for the connection of two different handpieces.
It has double operating system being able to choose between the original system in which the engraving force is controlled on the panel and the speed of impacts on the pedal or choose the plus mode in which the number of impacts per minute is set on the panel and by means of the pedal the force of the impact on the handpiece is increased with the limit previously set on the panel.
It also has a self-bleeding filter valve to guarantee the good condition of the machine. The system allows a precise engraving and with excellent control of the depth of the cut which allows an excellent brightness in the engraving of gold, silver and precious metals.
The setting control by means of the plus system guarantees absolute control of the impact of the grass on the piece of jewelry that avoids damage to the piece with an undesirable blow on it. It is a very reliable, resistant and small size system.
It is connected to a compressor by means of a plastic hose and the air consumption is very reduced and can also work with a co2 bottle.
ADENTA®-VEST CB
ADENTA®-VEST CB is a phosphate-bonded investment powder for all precious and non-precious dental alloys for crowns and bridges.
ADENTA®-VEST CB can be used for the speed casting as well as for conventional heating (overnight-technique).
The adequate expansion can be adjusted for every type of alloy by changing the concentration of the appropriate Adentatec MIXING LIQUID.
ADENTA®-VEST CB features a high fitting accuracy (even for wide span bridges) of non precious dental alloys.
Mixing ration: 100 g : 24-26 ml
Packaging: 10,08 kg box (63 x 160 g bags)
STANDARD VALUES FOR THE LIQUID CONCENTRATION
| Material | Inlay, Veneers | Crowns | Bridges |
| CoCr alloy | 85 % | 85 % | 95 % |
| Gold alloy | 55 % | 60 % | 65 % |
| Press-ceramic | 60 % | 60 % | – |
INFORMATION ABOUT ADENTA®-VEST CB
| – For precious alloys – For non-precious alloys – For pressable ceramics – For conventional and speed casting – Clean and smooth surface – High fitting accuracy – Smooth and dense consistancy – Flexible and cost-efficient |
CALIBRA-EXPRESS
UNIVERSAL INVESTMENTS FOR FIXED PROSTHESIS.
MADE IN SPAIN
- A SINGLE INVESTMENT FOR ALL FIXED PROSTHETIC WORKS.
- POSSIBILITY OF CASTING BY DIRECT OR NORMAL HEATING.
- POSSIBILITY OF CASTING PRESSED CERAMIC.
- Reproduction of the fi nest details.
- Easy demolding.
- Easy sandblasting.
- Fast or conventional heating.
- Fluidity: 140-160 MM.
- FInitial hardening: 6-8 min.
- Resistance to compression: 4-6 MPa.
- Thermal linear expansion: 0,97% (900ºC).
ANODE ALBILEX (4×3)
In general mixed metal oxide coated titanium anodes consist of a titanium base activated with a coating like rutile structure out of platinum group metal oxides, i.e. mixed with titanium, tantalum or other oxides.
ALBILEX®-MMO-Anodes – used for the electrophoretic coating process Antitarnish-A-100 PRO-KIT - are based on an iridium-tantalum activation, 12.5 g iridium per sqm, titanium mesh type A, with a welded hook.
HEAD LOUPE HAWK EYE BLACK 1.6X
HEAD LOUPE HAWK EYE BLACK 2.0X
202K-040-AW TRAVEL TOOL KIT W/CASE ( 5pcs set )
228S-420-AW WIRE STRAIGHTENER TOOL
The Artistic Wire Straightener tool makes it easy to straighten wire that has been worked. Put the rollers in your hand in the open position with each of the rollers side by side. Lay the end of a piece of wire that requires straightening on the three rollers, then move the rollers until they form a triangle with the wire in the center. Grasp the rollers in one hand holding tightly, then pull the wire through the rollers to straighten. May need to pull through a second time for highly bent wires. Nylon rollers help keep Artistic Wire coating intact.
205S-012-HOLE PUNCH PLIERS 1.8mm
JTNJ50REP-NYLN JAW REPLCE TP FLT/RND ( 2pcs set )
JTNJ40REP-NYLN JAW REPLCE TP ROUND ( 2pcs set )
JTNJ30REP-NYLON JAW REPALCE TP FLAT ( 2pcs set )
JTNJ10REP-NYLN JAW REPLCE TP LG FLAT ( 2pcs set )
201X-290-PLIERS NYLN CHING STP RD,OV,SQ
201S-270 NYLON JAW BENDING PLIERS
Nylon Jaw Bending Pliers,
Box Joint,
Polished Stainless Steel Handles.
Use the Nylon Jaw Bending Pliers to prevent marring and marking your wire and components as you bend them into a gentle curve that will comfortably fit your wrist. Use these stainless steel pliers to form a complete circle for a bangle bracelet, or gently form a flat component into a perfect curve.