ADENTA®-VEST CB
ADENTA®-VEST CB is a phosphate-bonded investment powder for all precious and non-precious dental alloys for crowns and bridges.
ADENTA®-VEST CB can be used for the speed casting as well as for conventional heating (overnight-technique).
The adequate expansion can be adjusted for every type of alloy by changing the concentration of the appropriate Adentatec MIXING LIQUID.
ADENTA®-VEST CB features a high fitting accuracy (even for wide span bridges) of non precious dental alloys.
Mixing ration: 100 g : 24-26 ml
Packaging: 10,08 kg box (63 x 160 g bags)
STANDARD VALUES FOR THE LIQUID CONCENTRATION
| Material | Inlay, Veneers | Crowns | Bridges |
| CoCr alloy | 85 % | 85 % | 95 % |
| Gold alloy | 55 % | 60 % | 65 % |
| Press-ceramic | 60 % | 60 % | – |
INFORMATION ABOUT ADENTA®-VEST CB
| – For precious alloys – For non-precious alloys – For pressable ceramics – For conventional and speed casting – Clean and smooth surface – High fitting accuracy – Smooth and dense consistancy – Flexible and cost-efficient |
CALIBRA-EXPRESS
UNIVERSAL INVESTMENTS FOR FIXED PROSTHESIS.
MADE IN SPAIN
- A SINGLE INVESTMENT FOR ALL FIXED PROSTHETIC WORKS.
- POSSIBILITY OF CASTING BY DIRECT OR NORMAL HEATING.
- POSSIBILITY OF CASTING PRESSED CERAMIC.
- Reproduction of the fi nest details.
- Easy demolding.
- Easy sandblasting.
- Fast or conventional heating.
- Fluidity: 140-160 MM.
- FInitial hardening: 6-8 min.
- Resistance to compression: 4-6 MPa.
- Thermal linear expansion: 0,97% (900ºC).
EVE Universal L22M Black
MAILLEFER CROWN PLATE SAW BUR 45 (NIQUA)
“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots.
The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.
SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.
Recommended operating speeds for most applications is 3,000-18,000 RPM. Lower speeds allow a softer touch, greater flexibility and more subtle results. Higher speeds provide more aggressive material removal. Using the tips of the pin with light pressure maximizes tool life.
Jewelry - Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.
“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots.
The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins.
SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals.
Recommended operating speeds for most applications is 3,000-18,000 RPM. Lower speeds allow a softer touch, greater flexibility and more subtle results. Higher speeds provide more aggressive material removal. Using the tips of the pin with light pressure maximizes tool life.
Jewelry - Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.