Showing 1–24 of 52 results

PROTECHNO (1)

ADENTATEC (4)

D+Z (5)

DENTECON (2)

DEDCO (4)

DENTORIUM (7)

ELA (8)

EVE (9)

MEISINGER (11)

ADENTA®-VEST CB

0.00
ADENTA®-VEST CB is a phosphate-bonded investment powder for all precious and non-precious dental alloys for crowns and bridges. ADENTA®-VEST CB can be used for the speed casting as well as for conventional heating (overnight-technique). The adequate expansion can be adjusted for every type of alloy by changing the concentration of the appropriate Adentatec MIXING LIQUID. ADENTA®-VEST CB features a high fitting accuracy (even for wide span bridges) of non precious dental alloys. Mixing ration: 100 g : 24-26 ml Packaging: 10,08 kg box (63 x 160 g bags)

STANDARD VALUES FOR THE LIQUID CONCENTRATION

Material Inlay, Veneers Crowns Bridges
CoCr alloy 85 % 85 % 95 %
Gold alloy 55 % 60 % 65 %
Press-ceramic 60 % 60 %

INFORMATION ABOUT ADENTA®-VEST CB

– For precious alloys – For non-precious alloys – For pressable ceramics – For conventional and speed casting – Clean and smooth surface – High fitting accuracy – Smooth and dense consistancy – Flexible and cost-efficient

CALIBRA-EXPRESS

0.00
UNIVERSAL INVESTMENTS FOR FIXED PROSTHESIS. MADE IN SPAIN
  • A SINGLE INVESTMENT FOR ALL FIXED PROSTHETIC WORKS.
  • POSSIBILITY OF CASTING BY DIRECT OR NORMAL HEATING.
  • POSSIBILITY OF CASTING PRESSED CERAMIC.
ADVANTAGES:-
  • Reproduction of the fi nest details.
  • Easy demolding.
  • Easy sandblasting.
  • Fast or conventional heating.
PHYSICAL PROPERTIES:-
  • Fluidity: 140-160 MM.
  • FInitial hardening: 6-8 min.
  • Resistance to compression: 4-6 MPa.
  • Thermal linear expansion: 0,97% (900ºC).

EVE Universal L22M Black

0.00
  • For smoothing all dental materials
  • Soft silicone bonding adapts to the surface being processed
  • Various shapes for different applications
  • Silicon carbide abrasive

MAILLEFER CROWN PLATE SAW BUR 45 (NIQUA)

0.00
Tool steel milling cutter 45 Crown saw / wheel for processing soft precious metals and alloys.

Shaft diameter: 2,30 mm

“DEDECO SUNBURST 2MM RED POLISHING PINS FINE – 400 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 3MM RED POLISHING PINS FINE – 400 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

“DEDECO SUNBURST 2MM BROWN POLISHING PINS EXTRA COARSE – 80 GRIT”

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the "absolute best" for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry -  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

DEDECO SUNBURST 3MM BROWN POLISHING PINS

0.00
No matter what the material being worked, SUNBURST POLISHING PINS are the “absolute best” for finishing & polishing hard-to-access areas without removing detail or causing flat spots. The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible rods enable them to work faster and last longer than conventional silicone and polyurethane pins. SUNBURST POLISHING PINS generate minimal dust and heat and eliminate the need for polishing compound on all precious, semi-precious and non-precious metals. Recommended operating speeds for most applications is 3,000-18,000 RPM.  Lower speeds allow a softer touch, greater flexibility and more subtle results.  Higher speeds provide more aggressive material removal.  Using the tips of the pin with light pressure maximizes tool life. Jewelry –  Ideal for finishing, smoothing and high-lustre polishing of all precious, semi-precious and non-precious metals, acrylics and ceramics.

DENTORIUM COOL WHEEL WHITE AB507

0.00
Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

DENTORIUM COOL WHEEL WHITE AB506W

0.00
Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium Blue Magic Rubber Points AB207

0.00

Dentorium Products AB207 - RUBBER POINTS BLUE

RUBBER POINTS BLUE Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals. Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium Blue Magic Rubber Wheel AB206

0.00

Dentorium Products AB206 - RUBBER POINTS BLUE

RUBBER POINTS BLUE Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium AB211 Cut – Off Wheel

0.00
Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics - known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium AB210 Cut – Off Wheel

0.00
  • Dentorium offers an extensive range of laboratory products, which are marketed worldwide, such as Abrasives for Ceramics and Metal and Abrasives for Cobalt-Chromium Alloys. Dentorium has abrasives for metals, ceramics and acrylics – known worldwide for their exceptional quality and low cost. Wide range of formats, sizes and grains, meeting the needs of the most demanding professionals.

Dentorium Red Discs AB221

0.00
Superb for the cutting, grinding and trimming of sprues. Aluminum Oxide for Chrome Cobalt. Made from the same high quality grain as regular but reinforced with glass fibre to give higher breaking resistance.

D&Z TAPERED BUR CB33L

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z TAPERED BUR CB33

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z CYLINDER BUR CB31

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z INVERTED CONE BUR CB30

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

D&Z ROUND BUR CB1

0.00
For conservative and prosthetic tooth treatment the D+Z range includes all popular shapes & sizes in medium, coarse, fine, extra -fine & ultra-fine grit & shank types RA, FG and FG short.

EVE TECHNIK H330Km

0.00
For smoothing, pre-polishing and polishing • Various shapes for different areas of application • Silicon carbide abrasive

EVE TECHNIK H330K

0.00
For smoothing, pre-polishing and polishing • Various shapes for different areas of application • Silicon carbide abrasive

EVE DIAPOL H8DSF

0.00
Polishing system for all porcelain materials • Diamond grit for highest efficiency • Surface corrections without additional glazing

EVE DIAPOL H8D

0.00
Polishing system for all porcelain materials • Diamond grit for highest efficiency • Surface corrections without additional glazing