Showing 1–6 of 34 results

ENSET© Compact System (800200)

0.00
The Enset© compact pneumatic is the entry model for engraving and crimping on jewelry pieces, its extraordinary power combined with the precision of the electronic foot pedal makes engraving fluid and with excellent control of cutting depth and brightness. It has a single port for quick connection of the handpiece. It has a filter valve to protect the equipment. In the compact version the pneumatic force is regulated by a wheel on the control panel and is reflected on the integrated pressure gauge. Through the pedal we will increase the number of impulses per minute to transfer the pneumatic force to the handpiece. The precision of the electronic pedal allows control of engraving and setting, protecting the valuable pieces of precious metals and guarantees the protection of the stone to be set against eventual shocks with the burin or the pearler. It is a robust machine, simple and intuitive to use, and uniquely compact, taking up very little space on the engraving table. You just need to plug it into the network and the pneumatic compressor and start engraving or engraving. The air consumption is very low so it can also be used connected to a CO2 bottle.

Enset Plus System (800100)

0.00
The best solution for engraving and crimping with a pneumatic system. It is a digitally controlled system for the engraving of jewelry pieces, system with double port for the connection of two different handpieces. It has double operating system being able to choose between the original system in which the engraving force is controlled on the panel and the speed of impacts on the pedal or choose the plus mode in which the number of impacts per minute is set on the panel and by means of the pedal the force of the impact on the handpiece is increased with the limit previously set on the panel. It also has a self-bleeding filter valve to guarantee the good condition of the machine. The system allows a precise engraving and with excellent control of the depth of the cut which allows an excellent brightness in the engraving of gold, silver and precious metals. The setting control by means of the plus system guarantees absolute control of the impact of the grass on the piece of jewelry that avoids damage to the piece with an undesirable blow on it. It is a very reliable, resistant and small size system. It is connected to a compressor by means of a plastic hose and the air consumption is very reduced and can also work with a co2 bottle.

ANODE ALBILEX (4×3)

0.00
In general mixed metal oxide coated titanium anodes consist of a titanium base activated with a coating like rutile structure out of platinum group metal oxides, i.e. mixed with titanium, tantalum or other oxides. ALBILEX®-MMO-Anodes – used for the electrophoretic coating process Antitarnish-A-100 PRO-KIT - are based on an iridium-tantalum activation, 12.5 g iridium per sqm, titanium mesh type A, with a welded hook.

LINDSTROM CUTTER 8150

0.00
PRODUCT DETAILS : Precision oval head diagonal cutters developed according to the scientific ERGO™ process, Oval head ERGO™ handles with two-component combination, thermoplastic surface, for comfortable grip, on tough polypropylene core for rigidity Micro-bevel, flush & ultra-cut The cutting capacity that is given is for copper wire Cutting capacity: 0.1 mm-0.8 mm to 0.4 mm-2 mm High performance alloyed steel Burnished finish Numerically controlled machine grinding guarantees edge angle accuracy & contact, increases the tool's reliability & consistency Precision induction-hardened edges 63-65 HRC Screw joint minimises friction & maximises alignment of cutting edges ESD safe handles in two-component synthetic material Bio spring limits the tension throughout the working cycle of the tool & can be adjusted to 3 different positions or removed Ideal for wire harness work & standard printed circuit board assembly

Greystar Polishing Compund

0.00
Pre-polishing compound for harder metals, removes deeper scratches and freshens up the surface
  • Small size compound bar (100x30x15mm)
  • Individually packed in DIALUX® branded box
  • Adheres well to mops or buffs
  • Long lasting, easy to use
  • Excellent price - performance ratio
Application: Apply with harder buffs, mops or felts

VALLORBE ROUND FILE LA2410-200-4

These Swiss-made, high-precision durable files are manufactured from chrome alloy steel and heat treated by a special process to guarantee sharper teeth for outstanding cutting performance on all hard and soft metals, including platinum. Designed with rounded handles. These files are measured from the point where the teeth begin to the end of the file. These Glardon® Vallorbe files are graded with a number from 00 for coarsest to 6 for finest. *Please note that the higher the number is, the finer the cut. Vallorbe jewellers saw blades are high quality, Swiss made saw blades. They have straight, uniform, sharp teeth, and retain there flexibility. Vallorbe saw blades are made from the highest quality steel, making them less likely to break whilst working.